BZBGEAR USB 3.0 over HDBaseT Extender (PoC, RS-232, GPIO & up to 100M/328Ft over CAT6a Cable)

Description

USB 3.0 over HDBaseT Extender (PoC, RS-232, GPIO & up to 100M/328Ft over CAT6a Cable)

The BG-USB3-LR100 USB 3.0 Extender is an essential tool for extending USB connections over long distances, capable of transmitting signals up to 100 meters (328 feet) using a single CAT6a cable. Designed for reliability and performance, this extender ensures high-speed data transfer with rates up to 5Gbps, making it ideal for various applications, including industrial settings and large-scale installations.

The transmitter features a USB 3.0 Type B input, FSYNC GPIO input, and RS-232 pass-through, while the receiver offers four USB 3.0 Type A outputs, FSYNC GPIO output, and RS-232 pass-through. This setup supports bi-directional 24V Power over Cable (PoC), simplifying power management and installation.

Transmitter

1. 1. USB HOST: Host port, supporting USB 3.0. Connects to a PC or host.
   2. USB LED: USB signal indicator.
      ● On: USB signal is detected.
      ● Off: USB signal is not detected.
   3. HDBT OUT: Connects to the HDBT IN port on the Receiver with CAT cable.
   4. LINK LED: Connection signal indicator.
      ● On: Transmitter and Receiver are connected and linked.
      ● Flashing: The Transmitter and Receiver link are off due to USB low power mode.
      ● Off: Transmitter and Receiver are not connected.
   5. RS-232: 3pin Phoenix connector, connected to a PC or control system for RS-232 command pass-through.
   6. FSYNC: FSYNC port, used for level pass-through to the Receiver and synchronizing the external devices. The default level is 3.3V.
   7. SERVICE: Firmware update port.
   8. POWER LED: The LED will be on when the Transmitter is powered on.
   9. DC 24V: DC 24V/2A power input port.

      Receiver

   10. USB 1/2: Connect to USB devices, and max output power is up to 5V/1.5A.
   11. USB 3/4: Connect to USB devices, and max output power is up to 5V/1A.
   12. USB LED: USB signal indicator.
       ● On: USB signal is detected.
       ● Off: USB signal is not detected.
   13. HDBT IN: Connects to the HDBT OUT port on the Transmitter with CAT cable.
   14. LINK LED: Connection signal indicator.
       ● On: Transmitter and Receiver are connected and linked.
       ● Flashing: The Transmitter and Receiver link is off due to USB low power mode.
       ● Off: Transmitter and Receiver are not connected.
   15. RS-232: 3pin Phoenix connector, connected to a PC or control system for RS-232 command pass-through.
   16. FSYNC: FSYNC port, receiving level pass-through from the Transmitter and synchronizing the external devices. The default level is 3.3V.
   17. SERVICE: Firmware update port.
   18. POWER LED: The LED will be on when the Receiver is powered on.
   19. DC 24V: DC 24V/2A power input port.